Catalogue_RR+FT_klein

299 Properties leakage resistance: less than 10,000 ohms Safety note instructions In order to ensure the conductivity of painted components, the attachment points to the transporter must have no paint. The electrical conductivity of the wheels and wheel coverings can be affected by incapacitating deposits or by chemical and mechanical influences. This could cause the permissible values (as specified in the standards) to be exceeded. Dust, dirt, paint, acids, alkalis, overloads and impacts can reduce or prevent electrical/electrostatic energy from being discharged to the floor. It is the sole responsibility of the user to continually monitor all safety-related requirements, such as compliance with electrical conductivity standards during usage. Hardness range depends on the tread material Temperature range depends on the series of wheel Bearing types plain bearing (through hole) roller bearing ball bearing electrical conductivity // Profile Electrically conductive wheels and castors areas of use// floors Solid rubber, thermoplastic rubber, polyurethane and polyamide are materials which are electrically conductive when they contain special additives. The wheels and castors then achieve an electrical resistance of less than 10 to the power 4 (10,000) ohms; they thus comply with the requirements of DIN EN 12527 and 12533. Such wheels and castors are used wherever an electrostatic discharge must be avoided (e.g. pharmaceuticals, clean room, automotive, and electrical industry applications). uneven & loose solid & sensitive solid & smooth/ at solid & un- even/rough soft & sensitive