Catalogue_RR+FT_klein

581 46385 Load-carrying capacity: Max. 200 kg/m Configuration of the bend carrier rollers: Max. track width 300 mm: one-section rollers Track width from 400 mm – 800 mm: two-section rollers Track width from 900 – 1,000 mm: three-section rollers The load capacity is dependent on the track width, pitch and the gap between the supports. You should choose a support spacing which is not larger than 2,000 mm. When ordering, please specify the desired roller conveyor type (type of roller, division and track width) and your desired track length. The conveyed goods must rest on at least three rollers in order to ensure that they are conveyed smoothly and do not tip over. The distance or pitch between the axles refers to the distance between the center points of adjacent rollers. length 1 m length 2 m length 3 m bend 90° usable width mm total width mm pitch mm tube-Ø mm 9180078STX1.000 Ident No.: 0014679 9180078STX2.000 Ident No.: 0014680 9180078STX3.000 Ident No.: 0014681 9280078ST90 Ident No.: 0014713 800 880 78 50 9180104STX1.000 Ident No.: 0014682 9180104STX2.000 Ident No.: 0014683 9180104STX3.000 Ident No.: 0014684 9280104ST90 Ident No.: 0014715 800 880 104 50 9180130STX1.000 Ident No.: 0014685 9180130STX2.000 Ident No.: 0014686 9180130STX3.000 Ident No.: 0014687 9280130ST90 Ident No.: 0014717 800 880 130 50 9190078STX1.000 Ident No.: 0029074 9190078STX2.000 Ident No.: 0029075 9190078STX3.000 Ident No.: 0029076 9290078ST90 Ident No.: 0029084 900 980 78 50 9190104STX1.000 Ident No.: 0029077 9190104STX2.000 Ident No.: 0029078 9190104STX3.000 Ident No.: 0029079 9290104ST90 Ident No.: 0029086 900 980 104 50 Suitable castors can be found on page 156 heavy-duty roller conveyors // medium to heavy loads type 50 suitable bases lattice base flat base belt battens longitudinal bars